RE: 3V AC/DC PSU for mounting in a back box/wall?

["Paul Gale" <groups2@xxxxxxxxxxxxxxxx>]

Back box as small as poss - single if possible but at a push could
live with double - can be any standard sized depth as the box still needs
to be fitted in the stud work.

Probably need an absolute max of 150mA. There are three devices - UFH room
temp sensor setpoint adjusters which can be powered by 2 x AA battery or 3V
DC - so hence wanting to mains power them.

Cheers,

Paul.



> -----Original Message-----
> From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf
> Of Tracey Gardner
> Sent: 28 January 2008 16:16
> To: ukha_d@xxxxxxx
> Subject: Re: [ukha_d] 3V AC/DC PSU for mounting in a back box/wall?
>
> You don't tell us what current rating you require or the depth of the
> back
> box or whether its a single or a double box?
>
> Tracey
>
>
>
> > Anyone know of a mains input PSU that will give 3V DC output AND
can
> be
> > mounted within an electrical back box in a wall? I know there are
> > thousands of wall wart type PSU's but I want something small
enough
> to fit
> > in a back box and be permanently wired to mains.
> >
> > Thanks,
> >
> > Paul.
> >
> >
>
>
> **** Sponsored By http://www.Berble.com ****
> ****       Computers You Carry          ****
>
>
>
>
>
>