[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: Power over ethernet switch
It can use the spare pins, or it can use the 2 pairs that have data on
them.
It however shouldn't be enabling the power till it detects the correct
load,
and even if power is supplied on the data pins, the magnetics in any normal
Ethernet device are unaffected since they lack the centertap on the primary
to extract the power.
From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf Of
Alex Monaghan
Sent: Tuesday, January 08, 2008 10:01 AM
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] Power over ethernet switch
It "should" be using the spare pins for power, so as long as your
device is
only connecting to the network, then all should be OK.
[Non-text portions of this message have been removed]
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|