The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Automating the press action of a momentary switch


  • Subject: Automating the press action of a momentary switch
  • From: "noughtomate" <balraj_jassal@xxxxxxxxxxx>
  • Date: Wed, 03 Dec 2008 16:01:15 -0000

Hi,

Are their any products on the market which allow you to perform a
mechanical press action on a momentary switch ?

It's the type of switch which performs an On or Off with the same
button. e.g. Your PC or an AV device.

I have a number of these types of devices which may be sensitive to
removing the mains using Z-Wave, X-10 etc.. so I was hoping there may
be some IR or IP controlled device to perform the finger press.

Is there anything out there ?

Thanks,

Balraj




------------------------------------

********************************************
Limited Time Offer - Free iPhone VAT Calculator
http://berble.com/index.php/component/content/article/109
********************************************


UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.