[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: CBUS dimmer & GU10 LED not functioning as expected
Have also found out if I plug a normal GU10 bulb in to one of the
sockets (theres 2 on each run) so theres a normal bulb and a LED one it
works fine
Adrian wrote:
> Hi
>
> have a 240v GU10 LED wired to a CBUS dimmer channel and it appears
that
> when the channel is off, i read 50v on the cct (which causes the LED
> bulb to glow at about 50%), if I unplug the bulb this drops to 0. The
> LED is not a dimmable type and I had configured the channel for
instant
> on/off operation, is this normal for LED bulbs?
>
> Am going to cut across to a relay but i though this would of worked
>
> and advice appreciated
>
> Adrian
>
>
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|