[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
CBUS dimmer & GU10 LED not functioning as expected
- Subject: CBUS dimmer & GU10 LED not functioning as
expected
- From: Adrian <yahoo1@xxxxxxxxxxxxxx>
- Date: Sun, 02 Sep 2007 12:32:06 +0100
Hi
have a 240v GU10 LED wired to a CBUS dimmer channel and it appears that
when the channel is off, i read 50v on the cct (which causes the LED
bulb to glow at about 50%), if I unplug the bulb this drops to 0. The
LED is not a dimmable type and I had configured the channel for instant
on/off operation, is this normal for LED bulbs?
Am going to cut across to a relay but i though this would of worked
and advice appreciated
Adrian
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|