[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: Faceplates
Mmmm, not sure. I will try to have a look tonight. The Cat5 modules
don't look particularly deep so 25mm would probably be ok, provided
you didn't have too much excess cable to "lose" inside the box.
IIRC I've got a 47mm deep box in the wall where the first set is to go
and this should be more than deep enough.
The limiting depth will probably be set by the bed radius for coax
though..=
.
I'll report back later :-)
Cheers,
Tim.
On 10/3/07, Ian Oliver <lists@xxxxxxx> wrote:
> In article
> <2829695e0710020553p16f3e90dk2bceb8284c94b147@xxxxxxx>, Tim
> Hawes wrote:
> > AP01460 4 gang white, faceplate, modular
> > AP01452 Cat 5e RJ45 (=A31.47 each + VAT :-)) )
> > AP01453 50mmx50mm, blank
> > AP01454 25mmx50mm, blank
> > AP01455 12.5mmx50mm, blank
>
> What size back boxes do you need for these modules?
>
> Regards
>
> Ian Oliver
> Sunny Leeds, UK
> Using Java on Tini for control via Dallas 1-wire
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|