[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: Re: Mains installation in garden
- Subject: RE: Re: Mains installation in garden
- From: "Neil Wrightson" <neilw@xxxxxxxxxx>
- Date: Sat, 12 May 2007 14:32:45 +1000
Hi,
13.8v is a standard supply voltage, as this is what is normally used to
power two way radios such as CB radios, ham radios etc.
Regards,
Neil Wrightson.
-----Original Message-----
From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx]On Behalf Of
rb_ziggy
Sent: Saturday, 12 May 2007 4:01 AM
To: ukha_d@xxxxxxx
Subject: [ukha_d] Re: Mains installation in garden
Fair point, drive with a slightly higher regulated supply and allow
for the drop off. I think you can get 13.5V regulated so that may
do the trick. Still have to be careful that the cable is thick
enough to handle those amps though!
The site selling the garden lights had stuff on the effect of
voltage drop off on brightness. I think it showed an exponential
drop off of brightness with voltage drop hence the reason not to
overextend the LV runs.
--- In ukha_d@yahoogroups. <mailto:ukha_d%40yahoogroups.com>
com, "Karam
Karam" <kzkaram@...> wrote:
>
> Richard,
>
> Purely from a theoretical standpoint :-) : You'll always get some
> voltage drop and who's to say the supply is exactly 12V? So one
thing
> to check is what is the minimum/maximum acceptable working voltage
> for the lights (are they really so fussy?)since you might even
> consider going to a slightly higher supply voltage.
>
> Karam
>
[Non-text portions of this message have been removed]
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|