The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: cctv server



How about a cheap camera with IP server built-in? Maybe cheaper the a
composite video IP server.

I've used these http://www.panasonic.co.uk/ip-cameras/blc1.html
at
about =A360 they are cheap and construction is poor but do the trick.

If I remember correctly, it comes with Panasonic IP recorder software
which runs on a PC to do recording - over local network.

For realtime viewing you need a browser - so maybe a cheap low-spec PC
connected to a monitor. Or maybe a tablet like Samsung Q1.

Just some thoughts......we have moved to Axis (www.axis.com) products
for custom install now - due to hugh product range, well documented
tech specs/integration options and high quality of products...... but
they come at a price!

An Axis solution would be something like the 241S server (
http://www.axis.com/products/cam_241s/index.htm
) which has one in and
one output. Axis PC software is free to record for one channel of video.

HTH,
Ben

--- In ukha_d@xxxxxxx, "Richard" <rich_lists@...> wrote:
>
> Is there any cheap units that can take an analog composite video
signal and
> turn it into something that will go over Ethernet to a computer
where dvr
> software is running, and more importantly it is shown on the monitor
in
> somewhere around realtime?
>=20
>=20=20
>=20
> I was hoping there was some cheap motionjpeg over Ethernet transport
or
> something, but all I seem to be able to find are fully featured camera
> servers that have all the email on motion etc built into them. I
would need
> several. Cant use cables since the buildings are only linked by
Ethernet and
> I don't want to go digging again.
>=20
>=20
>=20
> [Non-text portions of this message have been removed]
>





UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.