The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

RE: Auto Filling Bath Project...



Chris,



Not sure what you mean.. never had a plug hole completely blocked by
hair... yet!



Marcus

________________________________

From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf
Of Chris Hunter
Sent: 21 August 2007 19:01
To: ukha_d@xxxxxxx
Subject: Re: [ukha_d] Auto Filling Bath Project...



'wonder how would it cope with hairs etc, which will inevitably go
down the plug-hole ?

Chris

On 21 Aug 2007, at 12:53, Marcus Warrington wrote:

>> I'd always thought I would put another inline electric valve in
the
>
>
>
> Good call... I'd not thought of that....sometimes the obvious isn't
> obvious :-)
>
>
>
> I suppose that the one down side is that if I could automate the
> actual
> plug (rather than a secondary valve) then I could automate the actual
> emptying of the bath as well. e.g. a set period of time after filling
> (2hrs.. or when no occupancy detected etc) the bath would empty
> itself,
> or maybe it should always empty before filling. Possibly even a
> pulsor
> glued to the back itself could detect if someone was in or out of the
> bath...
>
>
>
> You wouldn't think that this was really required but teenagers (and
> sometimes SWMBO!) are master of expending the least amount of
> energy...
> and actually emptying a bath or turning off a light seems like a
> lot of
> effort to them.
>
>
>
> Mmm.. I wonder if its possible to install a basin style popup waste
> (the
> one that uses a rod rather than cable) below the current one, and have
> it PUSH up the plug rather then the cable. Would mean that I would
> have
> to restrict the pipe work to 32mm instead of 40mm but that would just
> mean it takes longer to empty.. hardly a big concern...
>
>
>
> Marcus
>
> ________________________________
>
> From: ukha_d@xxxxxxx <mailto:ukha_d%40yahoogroups.com>
[mailto:ukha_d@xxxxxxx
<mailto:ukha_d%40yahoogroups.com>
] On
Behalf
> Of Kevin Hawkins
> Sent: 21 August 2007 12:06
> To: ukha_d@xxxxxxx <mailto:ukha_d%40yahoogroups.com>
> Subject: Re: [ukha_d] Auto Filling Bath Project...
>
>
>
> Marcus Warrington wrote:
>> As part of my ongoing bathroom refit..(can't believe this is
>> taking me
> so long), I've spent the weekend automating the filling of the bath...
>>
>
> Interesting - something I've long been intending but not yet done -
> like so many other things.
>> The big stumbling block at the moment is trying to automate the
popup
> waste... currently we have to remember to make sure the plug is
"in"
> after emptying the bath, otherwise the next autofill just goes down
> the
> drain rather than filling the bath.
>>
>>
> I'd always thought I would put another inline electric valve in the
> overflow pipe (powerfail open) . It would have to be a large diameter
> I guess but I'm sure they exist. Pressure would be low.
>
> K
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
>





[Non-text portions of this message have been removed]




UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.