The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Cooling Node 0 (or your spare cupboard under the stairs!)



I've managed to find an old 200w PSU - the ones that had a 'proper'
power switch on it rather than those new fangled things that take a
signal from the motherboard!

Now need to get hold of some more fans - had one kicking around as a
spare - the whole thing doesn't seem very 'windy' (!) so a few more are
definitely needed to cause a bit of a nice draft.

What would be a good 'filter' to stick in the way that would still allow
good airflow? foam or an old cotton t-shirt maybe ? :-)

Also - is it a good thing to have the hot air just vented into the loft
space or would it be better to move it out side?

Oh and if anyone has any reasonable ideas as to doing something useful
with the warm air rather than vent outside - suggestions welcome!

Cheers!
Wayne.




UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.