Re: Running a new coax cable from my sky dish to node0

["Tim Hawes" <timsyahoo@xxxxxxxxxxxxxx>]

This is how my set-up is connected. I self-installed my Sky dish and
currently have one cable from the dish to just inside the loft,
another cable down to node zero, another from node zero to a lounge
wall plate, and finally one more short lead to the decoder.

I had serious problems with reception due to trees. Since moving the
dish I've got no further issues :-)

I use these couplers for all joins, even the wall-plate in the lounge
is a custom made (DIY) job with one of these fitted:
http://cpc.farnell.com/jsp/endecaSearch/partDetail.jsp?SKU=SECON2
or www.cpc.co.uk and p/n "secon2"

HTH,

Tim.


On 10/13/06, Chris Miles <chrismiles@xxxxxxx> wrote:
> Thanks... Am i able to just run the existing feed up to my loft then
and then join to a seperate coax cable
> going to node0 without much insersion loss?
>
> Chris


** Sponsored by http://www.BERBLE.com **
all the Cool Stuff, in one Place