[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: Running a new coax cable from my sky dish to node0
Thanks... Am i able to just run the existing feed up to my loft then
and then join to a seperate coax cable
going to node0 without much insersion loss?
Chris
----- Original Message -----
From: Jim Noble
To: ukha_d@xxxxxxx
Sent: Friday, October 13, 2006 3:22 PM
Subject: Re: [ukha_d] Running a new coax cable from my sky dish to node0
Chris Miles wrote:
> Is it easy to connect the cable at the dish side? thats really the
only important thing I need to know.
>
It needs to be done with care to ensure no water gets in. The sky
installers use sealed compression connectors I believe, and then [they
should, but don't always] wrap them in self-amalgamating tape to try and
ensure they stay dry.
Jim
[Non-text portions of this message have been removed]
** Sponsored by http://www.BERBLE.com **
all the Cool Stuff, in one Place
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|