The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

RE: Epoxy Paint to concrete floors


  • Subject: RE: Epoxy Paint to concrete floors
  • From: "Rob Mouser" <groups@xxxxxxxxxxxx>
  • Date: Sun, 8 Oct 2006 15:53:06 +0100

>>Is it easy to achieve a very smooth finish? I assume it is
self
>>leveling so you only need to apply it quickly?
>>
>>I am intending to use an epoxy paint then use a ployeurethane clear
>>coat on top to give a gloss surface.
>>
>>Any advice or recommendations appreciated.

Not the 'easiest' product in the world to use. Have you considered a
good quality two pack water based epoxy? Once mixed you'll get a pot
life of up to 8 hours and it takes 1-2 hours to dry so can be applied
easily with a good quality roller.
As long as your floor is CLEAN, DRY and well sealed then you'll get a
good finish.

HTH

Rob


** Sponsored by http://www.BERBLE.com **
all the Cool Stuff, in one Place



UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.