[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: Multiple momentary pushbuttons?
Jim,
Does it have to be a US-style faceplate?
Clipsal do some modular faceplates with momentary push-buttons, e.g.
http://www.letsautomate.com/clipsal.cfm?
DIY is also possible - see Paul's home made switch in the bottom left
corner of this page:
http://paulgordon.homeip.net/bathroom.html
HTH,
Tim.
On 5/15/06, Jim Koornneef <koornneef@xxxxxxx> wrote:
> Hi!
>
> I'm looking for a product that will have multiple switches or
> pushbuttons that will connect to a low-voltage/hardwired input panel
> for a job...
>
> I.E. not a smart switch running X10 or whatever, 4 switches with
> either 5 or 8 wires (1 for each and common ground or pair for each.)
>
>
> I've found http://www.edt.biz/2004/Products/HMB.html
>
> Ideally, Leviton makes those timers/dimmers/x10 with 4 buttons and I
> would love those as buttons only -- no internal smarts. Maybe even
> with controllable LEDs.. Below is link to the general idea I'm
> talking about:
> http://www.smarthome.com/4253.HTML
> http://www.smarthome.com/4231w.html
> http://www.smarthome.com/12064w.html
>
>
> Any Ideas?
>
> Thanks.
> -jim
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|