[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: Fw: Stair LEDs
Hi Jim
It is indeed the Atmel range, specifically the ATMega16. I won't use ISP
however. My preference is to use the JTAG interface for initial programming
and debugging and then use a boot loader via the serial port for firmware
updates. Once in production I will load the boot loader in using JTAG and
the main program using the boot loader. Very sweet.
Ian
---------+--------------------------------->
Jim Noble
<yahoo-groups@black-me
tallic.com>
Sent by:
ukha_d@xxxxxxx
17/03/2006 11:47
Please respond to
ukha_d
---------+--------------------------------->
>-----------------------------------------------------------------------------------------------------------------------------
To: ukha_d@xxxxxxx
cc: (bcc: Ian Bird/CV/Novartis)
Subject: Re: Fw: [ukha_d] Stair LEDs
>-----------------------------------------------------------------------------------------------------------------------------
ian.bird@xxxxxxx wrote:
> The chips are completely blank when they arrive from the shop. To be
able
> to program them through the serial port I need to load a program into
them
> and set some fuses (flags if you like).
>
Is it the Atmel AVR you're using?
http://www.atmel.com/dyn/resources/prod_documents/DOC0943.PDF
Jim
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|