Fw: HV to CBUS

[Gareth Cook <g@xxxxxxxxxx>]

Kevin

Can this same board be taken to plug into a Comfort UCM also ? And=20
send/receive commands from there ?

Could it have a "matrix" to map commands/results into xAP
messages ?

G.

Gareth Cook
IT Architect / Project Manager, SWG Sales
IBM SWG Sales - Lotus Park, Staines, TW18 3AG
Office: +44 (0)1784 445166 - Mobile: +44 (0)7980 445166
email: g@xxxxxxx

=20
----- Forwarded by Gareth Cook/UK/IBM on 20/07/2006 14:14 -----

Discussion
Main Topic

ukha_d@xxxxxxx
Today 13:37

.
Subject:
.
Re: [ukha_d] HV to CBUS
.
Category:



At the moment the ports are spare and may (or may not ) be used later.=20
They were for use in the xAP board for future attached peripherals like=20
perhaps a Meteor CID  - HomeVision - TOM10 temp board, Matrix switcher=20
etc etc.  There is also the electronics for an X10 interface,  keypad=20
and lcd screen on there - basically it was a good flexible base for=20
later expansion.   I can't implement the PCI functionality , or the CNI=20
as there is no information available to do this, and it is probably very=20
complex, or resource intensive anyway.

Kevin


Phil Harris wrote:
>
>
> Well, you know that I'll take one of the hardware boards if you=20
resurrect
> the project...
>
> You say your board has ethernet, 4 serial ports, web server and=20
> "additional
> IO" - what exactly are those used for (if anything)? For example,
can=20
the
> serial ports allow the board to be used as a PCI? (Can they be=20
> accessed from
> HomeVision?) Can the ethernet port allow the unit to be used as a
CNI?=20
> What
> facilities were to be supplied by the webserver? What's the=20
> capabilities of
> the "additional IO" and how is it accessed?
>
> Phil
>
> > -----Original Message-----
> > From: ukha_d@xxxxxxx <mailto:ukha_d%40yahoogroups.com>=20
> [mailto:ukha_d@xxxxxxx <mailto:ukha_d%40yahoogroups.com>]
> > On Behalf Of Kevin Hawkins
> > Sent: 20 July 2006 00:23
> > To: ukha_d@xxxxxxx <mailto:ukha_d%40yahoogroups.com>
> > Subject: Re: [ukha_d] HV to CBUS
> >
> > Nope - I didn't ever complete that project (or update those
> > web pages) . I did release the xAP version.
> >
> > There are two ways of doing C-Bus from HomeVision (without a PC)
.
> >
> > One you use the custom lighting functionality built into
> > HomeVision to drive C-Bus directly via a serial port into the
> > PCI. However HV is not powerful enough to deal with all the
> > C-Bus traffic and so you have to use a subset. It's main
> > constraints are in speed, storage space and serial port
> > handling with long data. It should be able to control C-Bus
> > groups and track , although not synchronise its state. Using
> > the C-Bus public release protocol you an get simple control
> > but it is not suitable if you use C-Bus wireless or want more
> > sophisticated interaction. I had written some macros to do
> > fuller control using parts of the full C-Bus protocol but got
> > involved a little in licensing issues. This may have cleared
> > up now and I have a few requests to revisit this which I have
> > promised I will do.
> >
> > The better way however is to assist HomeVision with a
> > co-processor that handles all the C-Bus interactions and just
> > takes commands from HomeVision and issues events back . This
> > allows for full integration into C-Bus without using a lot of
> > resources, both in processing time and storage. I had
> > intended a product for this, indeed my board is already
> > manufactured to be able to do this, but when I moved away
> > from HomeVision myself (and based on initial demand) it sort
> > of dropped down my priorities. I know a lot of UKHA'ers have
> > HV and love it so if there is now significant interest again
> > I might look at resurrecting it. My board is a bit of an
> > overkill here as it includes Ethernet, 4 serial ports,
> > additional I/O plus 512K RAM, 512K Flash and a web/ftp
> > server, and so cost wise isn't ideal. It's likely to be circa
> > =A3150. Better would be a cut down board with just one serial
> > port and maybe still Ethernet that I could bring in at under
> > half that price. Let me investigate what options I might have
here.
> >
> > Kevin
> >
> > PS If you are comfortable involving a PC then the xAP C-Bus
> > board is available and can work with several free and
> > commercial software packages . To use HV and C-Bus together
> > this way the recommended route is probably HomeSeer.
> >
> >
> >
> > Frank Mc Alinden wrote:
> > >
> > > Hi Ken
> > >
> > > I dont think Kevin has enabled his Hardware to work with
> > Homevision at
> > > the moment.....
> > >
> > > Frank
> > >
> > > ----- Original Message -----
> > > From: "Kenneth Watt" <kwatt@xxxxxxx=20
> <mailto:kwatt%40funkycool.co.uk>
> > > <mailto:kwatt%40funkycool.co.uk>>
> > > To: <ukha_d@xxxxxxx <mailto:ukha_d%40yahoogroups.com>=20
> <mailto:ukha_d%40yahoogroups.com>>
> > > Sent: Thursday, July 20, 2006 3:19 AM
> > > Subject: RE: [ukha_d] HV to CBUS
> > >
> > > >> There is a xap to CBUS gateway in hardware - it
that
> > what you mean ?
> > > >
> > > > Found it, it was Kevin...
> > > >
> > > > http://www.ukusa.demon.co.uk/HVCBUS.htm=20
> <http://www.ukusa.demon.co.uk/HVCBUS.htm>
> > > <http://www.ukusa.demon.co.uk/HVCBUS.htm=20
> <http://www.ukusa.demon.co.uk/HVCBUS.htm>>
> > > >
> > > > At the bottom of the page.
> > > >
> > > > Exactly what I'm after as I don't have to rely on a PC
to do the
> > > > grunt work.
> > > > I don't trust them for critical tasks, never have and
> > probably never
> > > will
> > > > and, by Kevin's writings on that page, I'd be right not
> > to use a PC
> > > > if possible. ;)
> > > >
> > > > K.
> > > >
> > >
> >
> >
> >
> >
> > ------------------------ Yahoo! Groups Sponsor
> > --------------------~--> Yahoo! Groups gets a make over. See
> > the new email design.
> > http://us.click.yahoo.com/XISQkA/lOaOAA/yQLSAA/IBOolB/TM=20
> <http://us.click.yahoo.com/XISQkA/lOaOAA/yQLSAA/IBOolB/TM>
> > ----------------------------------------------------------
> > ------~->
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
>
>=20





=20