[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: Re: Can I use speaker cable for an subwoofer?
- Subject: RE: Re: Can I use speaker cable for an
subwoofer?
- From: "Nick Tyson - The Edge" <nick@xxxxxxxxxxxxxxxxxxxx>
- Date: Fri, 10 Feb 2006 14:18:18 -0000
Hi Tom,
It would be better to put a 'proper' line level cable in if you still
have the option, but you can physically do it with two speaker cables
and phono connectors (although you might need a resistor to match
impedance).
Nick
Nick Tyson
The Edge
Tel 01473 288211
Fax 01473 288255
Email nick@xxxxxxx
-----Original Message-----
From: Tom Dubourg [mailto:tom@xxxxxxx]
Sent: 10 February 2006 14:04
To: ukha_d@xxxxxxx
Subject: [ukha_d] Re: Can I use speaker cable for an subwoofer?
Thanks Nick
I am planning to route a line level signal only ie., using the RCA
connection on the back of my cinema amp) - Will a line level signal
be ok to transport using speaker cable to my subwoofer line in??
Tom
--- In ukha_d@xxxxxxx, "Nick Tyson - The Edge" <nick@...>
wrote:
>
> Depending on the sub you might want both.
>
> This can allow you to establish different settings for music and
movies
> without having to constantly re-calibrate.
>
> ie music can be a subtle and controlled setting, using a full range
> output via speaker cables, to add depth, whereas for the more
dynamic
> requirements of a movie soundtrack you still get the 'music'
performance
> PLUS the dedicated .1 LFE channel via a phono cable.
>
> Some subs will allow you to do this and some won't.
>
> Nick
>
> Nick Tyson
> The Edge
> Tel 01473 288211
> Fax 01473 288255
> Email nick@...
>
>
>
> -----Original Message-----
> From: Tom Dubourg [mailto:tom@...]
> Sent: 10 February 2006 13:24
> To: ukha_d@xxxxxxx
> Subject: [ukha_d] Can I use speaker cable for an subwoofer?
>
>
> Hi all
>
> I'm in the process of cabling my lounge before it is
plasterboarded
> next week.
>
> I'm using high quality speaker cable for the front, centre and
> surround channels. Will there be any problems if I use this
speaker
> cable to feed the line level signal to the subwoofer (approx 16ft
> cable length required)? Or do I need to use dedicated phono cable?
>
> Thanks!
> Tom
>
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.375 / Virus Database: 267.15.4/255 - Release Date:
> 09/02/2006
>
>
> --
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.1.375 / Virus Database: 267.15.4/255 - Release Date:
> 09/02/2006
>
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|