[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: Consumer Unit Wiring with sub-units?
- Subject: RE: Consumer Unit Wiring with sub-units?
- From: "Des Gibbons" <des@xxxxxxxxxxxx>
- Date: Tue, 5 Dec 2006 15:00:40 -0000
> Hi Des,
> Freaky timing. I'm having a single Sub main fitted this
> weekend with a 10mm 40A feed from the main CU. Sub main will
> feed 4 X 12 CBus relay units.
No dimmer units?
> I don't have details of the busbar arrangment - I'll ask him
> in the next day or two to hand but the CU is a MK K5681s
Ok, so that is a SP board, I wonder if he is just going to wire it off a SP
MCB then?
>
> Whats the wisdom for the 'seperate earth feed'
IIRC Rob's Sparkie insisted on the separate earth feed for safety. (I think
it was Rob, but it was a fair while ago I ran the cables :)
Cheers, Des.
** Sponsored by http://www.BERBLE.com **
all the Cool Stuff, in one Place
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|