[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: Video Distribution
- Subject: RE: Video Distribution
- From: "Andy Laurence" <andy@xxxxxxxxxxxxxxxxxx>
- Date: Mon, 3 Apr 2006 13:29:41 +0100
From: Frank Mc Alinden [mailto:frankmc@xxxxxxx]
> My FirM Controller would be able to do this....But it was designed
around
> Homevision.......
>
> http://www.armaghelectrical.com.au/page7.html
>
> I have made a prototype serial interface for FirM ...which talks to
xPL
> ...It would also require the USB UIRT to generate + decode the ir
> signal.........
Am I right in thinking that this device reads IR inputs, and sends the
commands out of a serial port along with the zone they were received in? I
assume the same is true in reverse, also (serial command in with zone
information sends command from specified zone transmitter)? That's one
part of the puzzle sorted. I suppose then all I need is a matrix switcher,
KAT5 modules, and some smarts to control it. I'm guessing the latter will
be the tricky bit.
Cheers,
Andy
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|