[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: GeoVision- PTZ
Hi Mark
> This uses RS-485? What is the maximum reliable cable run?
With proper cable you can technically go to 1.5km depending on the baud
rate
of the comms...
In a domestic situation i dont think distance will be an issue........
>Do some do it
> usung just te coax cable?
Not sure on this ......
If the PTZ utilises the VCL Protocol Steve could supply you macros so you
can control via a Homevision serial board as welll as the pc......
Frank
----- Original Message -----
From: "Mark McCall" <lists@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Tuesday, July 26, 2005 11:01 PM
Subject: RE: [ukha_d] GeoVision- PTZ
>> Most PTZ cameras will support using one pair of
>> cable for PTZ control, CAT5 is fine.
>
> This uses RS-485? What is the maximum reliable cable run? Do some do
it
> usung just te coax cable?
>
> Thanks
>
> M.
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|