Vigor - New Firmware (Vigor2600V, Vigor2600VG, and Vigor2600VGi ONLY)

["Mark McCall" <lists@xxxxxxxxxxxxxxxxxxx>]

2.5.6rc5_UK (Beta)

http://support.draytek.co.uk/


Build Date            : Sat Jul 23 10:35:14.66 2005
Status              : Release Candidate
For Models          : Vigor2600V, Vigor2600VG, and Vigor2600VGi  ONLY

This firmware is for UK use ONLY.

************************************************************************


Changes since firmware 2.5.5.3
------------------------------

[Improvement and Correction]:

1. Fix MSN Messenger hang up when UPnP enabled.
2. Fix DHCP IP conflicts when Static/Dynamic IPs are intersected.
3. Imrpove NAT Loopback (Access LAN server by WAN IP)
4. Upgrade Wireless code to the latest version
- Improves Intel Centrino performance issue
5. Upgrade SIP code
- Support 2 SIP registrars (one on each phone port)
- Support Change IP ToS option, improve for some ISP
- Support different country and user defined tones
- Improve sip registration mechanism.
- Improve sdp parser to allow incoming calls with unknown sdp attribute
problem.
- Improve handling generic type CNG packet (caused un-wanted noise)
- Add speaker and Mic volume change from telnet command
- Set default tone by country code
- Remove VoIP -> SIP Related Functions Duplicate button
- Remove VoIP Connection Status' Channel Volume button
- Correct change RTP port did not apply to next call problem
- Correct VoIP call can't build up for some sip gateway
6. Increase max sessions to 15,000.
7. Correct QoS direction classify
8. Correct telnet command: show nat
9. Correct Static Route/RIP subnet assume as Private IP
10. Correct WebUI can't change system password to NULL string
11. Correct telnet command: sys passwd maximum characters is 23 not 20
12. Correct H.323 device under Private IP DMZ
13. Change DoS Defense default settings
14. Correct USB Printer can crash router
15. Correct ATA not being able to dial out behind VigorV2600V
16. Correct DMZ functional maybe make Router busy
17. Correct UDP Fragment packet can't pass when WAN is PPPoE
18. Correct large Fragment packet may cause Router reboot
19. Add NcBuffer information into telnet command: sys qrybuf
20. Correct enter TKIP then change SSID, can't connect to Router
21. Correct telnet command: adsl ppp parse error
22. Add telnet command: ip pppoe enable/disable
23. Increase HTTP idle timeout to 5 minutes
24. Correct VoIP receive duplicate RTP packets
25. Correct 2nd subnet DHCP/VPN LAN to LAN Profile page can't apply in
FireFox
26. Correct problem with UDP Fragmented packets & memory issue
27. Detect TearDrop/NewTear and Bonk/Boink DoS attack