RE: Serial connection over Cat5 getting corrupted

["Paul Gale" <groups@xxxxxxxxxxxxxxxx>]

Thanks Frank - I know I should have bought some of the cheap MS1000's !!! I
resisted the HA urge - always a bad move! ;)

Just been testing some more and it now works on the original server on port
4 of the 8 port card. Must be either a conflict or dodgy card?

Paul.



> -----Original Message-----
> From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf Of
> Frank Mc Alinden
> Sent: 14 July 2005 10:12
> To: ukha_d@xxxxxxx
> Subject: Re: [ukha_d] Serial connection over Cat5 getting corrupted
>
> Hi Paul
>             Had the same issue when i first put hv in my node 0  which
was
> a
> short run...even at 9600 baud still had issues ........Fixed it by
> installing a pair of rs232 /422  convertors .....I suspect it was a
cheap
> line driver on my pc as i have has issues with the same serial port
when
> connected to my cbus touchscreen...........
>
> Not able to connect it to your nerwork using an MSS100 ....??? Done
this
> with hv and other kit ...
>
> HTH
> Frank
>
>
> ----- Original Message -----
> From: "Paul Gale" <groups@xxxxxxx>
> To: <ukha_d@xxxxxxx>
> Sent: Thursday, July 14, 2005 6:31 AM
> Subject: [ukha_d] Serial connection over Cat5 getting corrupted
>
>
> I've just wired up my aquarium computer (RS232) via my structured Cat5
> cabling back to node0. I guess there's about 10-15m in the run.
>
> The trouble is, I'm getting some corruption in the sent data -
spurious
> characters and line feeds missed off.
>
> Any ideas what I can do to improve the comms?
>
> Ta,
>
> Paul.
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>