[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: Re: Best method of drilling a wall plate?
Hi
It definitely works.....I believe you can also buy drill bits like
this.....
Frank
----- Original Message -----
From: "solentelectricalservices" <paul@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Wednesday, February 23, 2005 7:35 AM
Subject: [ukha_d] Re: Best method of drilling a wall plate?
>
>
> sounds sensible will have to try that one.
>
>
>
>
>
> --- In ukha_d@xxxxxxx, "Frank Mc Alinden"
<fmcalind@b...>
> wrote:
> > Hi Darren
> > To drill plastic plates i modify the drill bit so
> that the
> > sides are flat (as Jonathon mentioned) with a small point in the
> middle
> > ....drill a very small centre hole first and then use the
modified
> drill
> > bit...works quite well...stops it from cracking.
> > HTH
> > Frank
> >
> > ----- Original Message -----
> > From: "darren_karp2001" <darren@a...>
> > To: <ukha_d@xxxxxxx>
> > Sent: Wednesday, February 23, 2005 5:14 AM
> > Subject: [ukha_d] Best method of drilling a wall plate?
> >
> >
> > >
> > >
> > >
> > > Hi All,
> > >
> > > What's the best method of drilling 6mm holes in a plastic
> > > (polycarbonate?) wallplate? I've tried a couple and it
cracks /
> > > looks untidy.
> > >
> > > TIA
> > > Darren
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > Yahoo! Groups Links
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|