The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

KAT5-FirM...Xantech


  • Subject: KAT5-FirM...Xantech
  • From: "Frank Mc Alinden" <fmcalind@xxxxxxxxxxxxxx>
  • Date: Wed, 9 Feb 2005 12:17:58 +1100


Hi All
As some may be aware recently Tony Butler did a review of his
KAT-FirM Jr installation. ....Keith and i have swapped some kit and i have
tested KAT5 IR with my FirM Jr and all looks well ;-)......................

Browsing thru my FirM schematics  i think with some minor mods to FirM
hardware and some simple firmware changes it may be possible to  use FirM
with KAT5  to  give zone identication which would be handy for those with
similiar kit ...or wanting to use cheap remotes to control lighting
etc.....Obviously this setup is biased to using Homevision ,but any other
controller  which can decode/generate ir and has i/o control could be
used......

It may also be possible to do the same with the Xantech receivers , but i
would need to purchase xantech rx unit  to try....If people are interested
let me know and i will investigate further.........
Thanks
Frank
www.armaghelectrical.com.au



UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.