Re: labgear / loft box with CCTV feed

["noel_pilot" <HA@xxxxxxxxxxxxxxxxxx>]

Could it be that the channel your RF modulator is set to is
conflicting with another channel being distributed?!?

Try changing the channel on the modulator,  alternatively
www.satcure.co.uk i think thats the site, it used to have a good tv
distribution guide and a calculator for empty tv channels in ur area!
HTH
Noel



--- In ukha_d@xxxxxxx, "ianh1000" <ianh1000@y...> wrote:
>
> Hi All
>
> I am trying to install a new CCTV camera for the babies room. I have a
> Labgear MRX390 similar to loftbox, a simple colour camer and an RF
> modulator.
>
> If I plug the camer and modulator into the TV on a short cable it all
> work fine. If I then connect via the dist amp it works with a test
> signal but I get no picture when i turn of test to see the camera.
>
> Is it simply that the signal is too low and I need to add a small amp
> between the modulator and CCTV input?
>
> Any help would be welcome as I am getting a bit frustrated!
>
> Thanks in advance.
>
> ian
>