The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

RE: Multiple xboxes in Node 0 infra red control


  • Subject: RE: Multiple xboxes in Node 0 infra red control
  • From: "Brian Smith" <briview.groups@xxxxxxxxxxxx>
  • Date: Sun, 21 Aug 2005 19:32:16 +0100

I might be wrong but I think you do this with Xantech gear by setting up
'Zones'.  Check out the diagram for this 4 zone block.

=20

http://www.xantech.com/products/i_folder/i_79520.pdf

=20

It shows 'common' components like source equipment and zone specific
equipment like amplifiers or in your case Xboxes.  Because you use stick on
emitters the IR signals are specific to individual bits of kit.

=20

Hope this helps.

=20

Regards

=20

Brian

=20

_____=20=20

From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf Of
noel_pilot
Sent: 21 August 2005 13:35
To: ukha_d@xxxxxxx
Subject: [ukha_d] Multiple xboxes in Node 0 infra red control

=20

Hi all,=20
I would like to install a number of modded xboxes for use as media
clients around the house.  In some cases it would be convenient for me
to install the xboxes in node 0 and run cables to the required tvs.=20
My question is this...Is there anyway to use slightly different infra
red codes to enable me to control two different xboxes using a xantech
infra red system.

I know this can be done on Tivo so you can use two tivos in the same
room with two different remotes but I have not heard of any way to do
it for the xbox.

Hope someone can help.
Thanks
Noel











SPONSORED LINKS=20


Home
<http://groups.yahoo.com/gads?t=3Dms&k=3DHome+repair+improvement&w1=3DHome+=
repair+
improvement&w2=3DComputer+stuff&w3=3DHigh&w4=3DImprovement&c=3D4&s=3D76&.si=
g=3DTcERUCDPQ
cJLbg9mtvQGJQ>  repair improvement=20

Computer
<http://groups.yahoo.com/gads?t=3Dms&k=3DComputer+stuff&w1=3DHome+repair+im=
proveme
nt&w2=3DComputer+stuff&w3=3DHigh&w4=3DImprovement&c=3D4&s=3D76&.sig=3DplS9-=
eUUfaBXyLVFT8
7AJg>  stuff=20

High
<http://groups.yahoo.com/gads?t=3Dms&k=3DHigh&w1=3DHome+repair+improvement&=
w2=3DComp
uter+stuff&w3=3DHigh&w4=3DImprovement&c=3D4&s=3D76&.sig=3Db5d547gPx7eFWNGqX=
QCl7A>=20=20


Improvement
<http://groups.yahoo.com/gads?t=3Dms&k=3DImprovement&w1=3DHome+repair+impro=
vement&
w2=3DComputer+stuff&w3=3DHigh&w4=3DImprovement&c=3D4&s=3D76&.sig=3DO6pw_ora=
tTOwep2G_91fI
Q>=20=20

=20

=20

=20

_____=20=20

YAHOO! GROUPS LINKS=20

=20

*	 Visit your group "ukha_d <http://groups.yahoo.com/group/ukha_d>
"
on the web.
=20=20
*	 To unsubscribe from this group, send an email to:
ukha_d-unsubscribe@xxxxxxx
<mailto:ukha_d-unsubscribe@xxxxxxx?subject=3DUnsubscribe>=20
=20=20
*	 Your use of Yahoo! Groups is subject to the Yahoo!
<http://docs.yahoo.com/info/terms/>
 Terms of Service.=20

=20

_____=20=20



[Non-text portions of this message have been removed]




UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.