[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: Connect IR receivers to PC
Hi,
I don't know your time frame for this but we
(http://www.eurosource.se/catalog)
will have this for VSCP
(http://www.vscp.org) later this fall.
Also transmitters. Both
multiprotocol.
With the new xAP driver for the CANAL/VSCP daemon xAP is also an
option in interfacing the system. There is also a WINLIRC driver
(http://winlirc.sourceforge.net/)
today for the VSCP daemon that
support most IR transmitters but this requires a PC.
/Ake
On 8/18/05, mitchellthraves <mthraves@xxxxxxx> wrote:
> Has anyone got any ideas how I would connect half a dozen Xantech
490-
> 00 MICRO LINK IR Receivers (or similar) to a PC so I can write some
> code that responds to the IR signals depending upon the IR code sent
> and which zone it came from. Hope this makes sense.
>
> Many thanks.
>
>
>
>
>
>
>
>
> ________________________________
> YAHOO! GROUPS LINKS
>
>
> Visit your group "ukha_d" on the web.
>
> To unsubscribe from this group, send an email to:
> ukha_d-unsubscribe@xxxxxxx
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>
> ________________________________
>
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|