The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: speaker connections that can interrupt ceiling speakers..??



Quoting Jonathan Tawn <Jonathan@xxxxxxx>:

>
> so, my question, if one plugs in larger speakers to the afore
mentioned
> connector, is the signal broken to the ceiling speakers via some
automatic
> thing (yes, that is a technical term) or does one have to use the home
> control system via a keypad or some other such device to physically
change
> from ceiling -to- large speakers.
>


If you use 6.5mm Jack plugs then you can use switched sockets that will
disconnect the ceiling speakers just as a headset jack does on a hifi
system.

HTH


Keith

www.diyha.co.uk
www.kat5.tv



UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.