[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: CAT5 tester
- Subject: RE: CAT5 tester
- From: "James Mitchelmore" <james@xxxxxxxxxxxxxxx>
- Date: Thu, 2 Sep 2004 22:33:55 +0100
Seconded.
James
-----Original Message-----
From: John Nye [mailto:lists@xxxxxxx]
Sent: 02 September 2004 22:23
To: ukha_d@xxxxxxx
Subject: Re: [ukha_d] CAT5 tester
Hi Ian,
Its not very elegant but this is what I do when I run 2 lengths of cat5
to a
socket:
Connect the 2 sockets together with a length of cat5 to make a loop.
Use a multimeter at the source end to check that each of the 8 cables is
complete.
Has worked fine for me so far and no need for expensive testers.
John
----- Original Message -----
From: "Ian B" <ian.bird@xxxxxxx>
To: "Ukha_d" <ukha_d@xxxxxxx>
Sent: Thursday, September 02, 2004 10:09 PM
Subject: [ukha_d] CAT5 tester
> Hi all
>
> I have to run and terminate (punch down one end and RJ45 plug on the
other)
> quite a few lengths of CAT5 at a local school soon. Since these
lengths
are
> going to span many rooms and I will be on my own does anyone have any
> suggestions for a good value CAT5 tester so I know everything will
work
for
> the little darlings come switch on time. This is a once only sort of
thing
> so several hundred pounds is out of the question.
>
> Any suggestions for a good value tester?
>
> Thanks
>
> Ian
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|