[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: Re: Re: X10 retrofit - part 2
The units I have are based around two circuit boards, one each side. I
have extended the LED wires and sunk them into the doorframe. They are
virtually invisible (and really were when Wifey painted over them one day)
and the original circuit boards are mounted above and behind the door so
out of the line of sight. There are 2 LED's one side and 1 the other.
Ian
"Marcus Warrington" <marcusw@xxxxxxx>
10/11/2004 16:12
Please respond to ukha_d
To: <ukha_d@xxxxxxx>
cc: (bcc: Ian Bird/CV/Novartis)
Subject: [ukha_d] Re: Re: X10 retrofit - part 2
Ian,
Thanks for the info, I'll check out maplins (and CPC, TLC etc)
Are the surface mounted or recessed into the door frame ?
I assume the active part is on one side of the frame and the otherside
is a reflector.. or are both sides active i.e. need wires to them ?
Marcus
[Non-text portions of this message have been removed]
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|