[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: Re: X10 retrofit - part 2
- Subject: Re: Re: X10 retrofit - part 2
- From: "Marcus Warrington" <marcusw@xxxxxxxxxxx>
- Date: Wed, 10 Nov 2004 16:12:26 -0000
Ian,
Thanks for the info, I'll check out maplins (and CPC, TLC etc)
Are the surface mounted or recessed into the door frame ?
I assume the active part is on one side of the frame and the otherside
is a reflector.. or are both sides active i.e. need wires to them ?
Marcus
> From: ian.bird@xxxxxxx
>
>I am using some from Maplins which were a tenner. Sometimes they do
them
>on offer for a fiver so worth watching for a while. I have just had a
>quick look and cannot see them at the moment although one of the listed
>ones does not have a picture so it could be that one (LL64U at 7.99).
If
>it has a speaker output or similar then it can be adapted to trigger
>something like a relay etc.
>
>I use HV and found that a quick moving person through the beam break
would
>sometimes be missed so I added a signal extender (home made) so HV did
not
>have any excuses to miss it.
>
>Ian
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|