The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: ADA Switcher Does 16 Source into 96 Zones


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Networking problems.



> All these points test OK with a basic flashing light network tester,
ie
all cables are pin2pin and none appear to be broken.


Not something stupid like a dodgy patch lead to the computer or Hub.....

Must ensure that whatever your using for testing is working OK.. first
!!!....
Frank

----- Original Message -----
From: "Stuart Grimshaw" <stuart@xxxxxxx>
To: "ukha list" <ukha_d@xxxxxxx>
Sent: Wednesday, May 12, 2004 7:44 PM
Subject: [ukha_d] Networking problems.


> Hi Guys,
>
> Just a follow up question to Umar's the other day.
>
> To recap, he's had some network cable fitted to his new house, approx.
70
points on each floor. Currently only the 1st floor is patched in.
>
> Out of the 12 points he has tested so far (by plugging a PC in and
trying
to connect to a device in node 0), 1 works, 1 has tremendous packet loss
&
the rest all fail.
>
> All these points test OK with a basic flashing light network tester,
ie
all cables are pin2pin and none appear to be broken.
>
> The origional wireing was faulty, with wires crossed and all sorts,
his
sparky has rewired the faulty sockets, at the socket end I beleive.
>
> We have eliminated interference from the electrics as he ran an
extension
from downstairs and switched off all the electrics upstairs, same problem.
The electrics from downstairs are totally seperate from the network cable
upstairs.
>
> He took a cable from the back of the patch panel & put a plug on
the end
of it and plugged that straight into the hub, still nothing, so that to my
mind rules out a faulty patch panel.
>
> Is there a maximum number of cables you should bunch together? All
cables
enter node 0 via the same very large hole, and the bunch is the size of a
tree trunk!!
>
> Umar, do you have any photo's of that to demonstrate?
>
> Any other ideas? I'm stumped.
>
> --
>
> -S
>
>
>
> UK Home Automation Meet 2004 - THIS WEEK!
> http://www.ukha2004.com
>
> http://www.automatedhome.co.uk
>
> Member Offers - http://www.freeranger.co.uk/ukha
> Yahoo! Groups Links
>
>
>
>
>




UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.