[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: Height off floor for projector
- Subject: RE: Height off floor for projector
- From: "Des Gibbons" <des@xxxxxxxxxxxx>
- Date: Tue, 8 Jun 2004 22:38:03 +0100
> -----Original Message-----
> From: Kenneth Watt [mailto:kwatt@xxxxxxx]
>
>
> > The ceiling in question is 2.55m high, no-one will be standing
under the
> > projector as there will be a sofa under it. Would 2.3m be an
acceptable
> > height?
>
> That would depend on the projector really Des, but it should be
> okay at that
> height for most LCD machines IME.
Thanks Ken.
OK, I will put the sockets at that height then, and I can always drop the
projector a bit if needed whenever I get one :)
I'm just gonna run a spur, and 4 x cat5 to that location, don't see the
point in running anything else.
Should I run mains to the location for a screen? I assume motorized screens
use 240v. I'll have a spare cat5 there so low voltage should be no prob.
CHeers, Des.
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|