RE: Speaker Wiring

["Rob Mouser" <groups@xxxxxxxxxxxx>]

Eureka!

http://www.musicianforums.com/forums/archive/index.php/t-148775.html

Hows this? Perhaps the author would alow it to be reproduced in part or
whole?

Rob

-----Original Message-----
From: Ian Davidson [mailto:ian@xxxxxxx]
Sent: 15 July 2004 15:38
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] Speaker Wiring

Hi Rob

Two 8 Ohm speakers when wired in Parallel will be 4 Ohms.

Two 8 Ohm speakers when wired in series will be 16 Ohms.

For more than 2 speakers in series then just keep adding.
For more than 2 speakers in parallel then use the equation Tony gave
you!

Ian D


-----Original Message-----
From: Rob Mouser [mailto:groups@xxxxxxx]
Sent: 15 July 2004 15:31
To: Ian
Subject: RE: [ukha_d] Speaker Wiring

>> where Rtotal = 1/(1/R1 + 1/R2 + 1/R3 ... )

Eh? In English man, in English!

Rob (GCSE Maths)

-----Original Message-----
From: Bricknell, Tony [mailto:tony.bricknell@xxxxxxx]
Sent: 15 July 2004 14:51
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] Speaker Wiring

You are safe to parallel wire them.

When you series wire them you add up the impedances - two 8ohm speakers
in series would give you 16ohms.

When you parallel them then the maths takes over... :o) where Rtotal =
1/(1/R1 + 1/R2 + 1/R3 ... )

HTH
Tony

-----Original Message-----
From: Rob Mouser [mailto:groups@xxxxxxx]
Sent: 15 July, 2004 14:28
To: ukha_d@xxxxxxx
Subject: [ukha_d] Speaker Wiring


Don't know why but this subject always fuddles my brain!



Want to connect two pairs of speakers to one amplifier.

Speakers are rated at 8ohm and the amplifier is rated as 4ohm safe.



So can I wire in series or parallel?



Am I right in thinking that series wired would leave 8ohms at the
amplifier and if in parallel 4ohms?



Cheers



Rob