The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Mv1000 camera issue


  • To: ukha_d@xxxxxxx
  • Subject: Re: Mv1000 camera issue
  • From: "Patrick Lidstone" <patrick@xxxxxxx>
  • Date: Tue, 20 May 2003 08:56:10 -0000
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

--- In ukha_d@xxxxxxx, steve.cooper@u... wrote:
>
> > Try connecting a resistor in parallel across the input. Start
with 1Kohm
> and
> > work down until you get a decent picture without too much
attenuation of
> the
> > signal.
>
> Just so you have the full picture these cameras have scart plug
outputs.

Steve, search the archives for a post I made regarding Response
cameras about a year or so ago. The scart connectors are funny on the
response cameras (well a bit counter-intuitive anyway). I'm pretty
sure you have a ground-related issue - I've played a lot with them
and never come across any issues. My MV1000 hasn't arrived yet
(grrr), but when it does, I'll come back to you.

Patrick



Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.