The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Questions on Ceiling Speakers


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Questions on Ceiling Speakers
  • From: "Mick Furlong" <hiltoneltd@xxxxxxx>
  • Date: Mon, 5 May 2003 12:28:25 +0100
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Paul

thanks for this that is exactly what I was after, I didn't want to be
sending a pile of them back because they wouldn't fit;)

Off to get my tape measure;)

Cheers
Mick
-----Original Message-----
From: Paul Robinson [mailto:ukcueman@xxxxxxx]
Sent: 05 May 2003 12:00
To: ukha_d@xxxxxxx
Subject: Re: [ukha_d] Questions on Ceiling Speakers


I have the 6.5" 125.063 in front of me.

I measured 62mm from the face of the plasterboard to the back of the
speaker plus about 15mm (ish)
below - so the total height of the speaker is 77mm. The web site says this
speaker has a depth of
65mm.

HTH
Paul

> Looking at getting some of the ceiling speakers  from Henry's
discussed
a
> while back and wondering if anyone could tell me the exact clearance
> required above the ceiling. On the web site it says 56mm but I think
someone
> mentioned these protrude 15mm from the ceiling  so is it 40mm from the
face
> of the plasterboard to the back of the speaker? I am pretty restricted
on
> space so need to know as close as possible what is required.





Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.