The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Serial Protocol Capture...


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Serial Protocol Capture...
  • From: "Des Gibbons" <des@xxxxxxx>
  • Date: Sun, 4 May 2003 11:40:08 +0100
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Hi Frank,



Sounds very interesting!

I take it it would be straightforward to modify the program to output to a
max232 and use something like Dan's program to monitor the traffic?

Cheers, Des.

> -----Original Message-----
> From: Frank Mc Alinden [mailto:fmcalind@xxxxxxx]
> Sent: Sunday, May 04, 2003 10:36
> To: ukha_d@xxxxxxx
> Subject: Re: [ukha_d] Serial Protocol Capture...
>
>
> Hi Des
>
> >Hmmm, did anyone ever make the rs485-rs232 adaptor?
>
>
>         While playing with rs485 comms using the pic16F628 i also
> made a rs232 /rs485 interface which outputted the rs485 data and
> displayed it on a tv (using the stv chip ) Its a bit buggy but
> was quite useful for testing my 6 byte protocol.........
>
> Frank
>   ----- Original Message -----
>   From: Des Gibbons
>   To: ukha_d@xxxxxxx
>   Sent: Sunday, May 04, 2003 7:28 PM
>   Subject: RE: [ukha_d] Serial Protocol Capture...
>
>
>
>
>   > -----Original Message-----
>   > From: Dan [mailto:dtoma@xxxxxxx]
>   >
>   > I have an intermediate version with time stamps on each line
> (a request of
>   > another user).
>   > The version 1.1 will have both the logs and the time stamp
included...
>   > With timestamp I can even use a single window for the
>   > communication in both
>   > directions (in transparent mode).
>
>   Wow, it is a very handy piece of software! Have you ever thought
about
>   having a paypal donate button on your site?
>
>   >
>   > > I don't suppose you have a version that works on rs-485?
:)
>   > I have no RS485 interface available here, so is a little bit
> difficult for
>   > me to make a version compatible with that one...
>
>   Hmmm, did anyone ever make the rs485-rs232 adaptor?
>
>   >
>   > What I need too is an X10 device who can send data (like a X10
PIR or
>   > something else), in order to implement the X10 input plugin in
InfraX
>   > Manager too (for the moment only trhe output plugin is
> available..I cannot
>   > do it otherwise...
>   > It is just too expensive to order one somewhere in Europe
> because of the
>   > transport cost and custom duties.
>   >
>   > X10 devices are not available locally, in Romania.
>
>   I don't have any X10 kit or I would send you one! I sthere not
> a PIC design
>   available for an X10 transmitter?
>
>   Cheers, Des.
>
>
>         Yahoo! Groups Sponsor
>               ADVERTISEMENT
>
>
>
>
>   ** UKHA2003 BE THERE! Details here:
http://www.automatedhome.co.uk/article.php3?story_id=1110
**
http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


[Non-text portions of this message have been removed]



** UKHA2003 BE THERE! Details here:
http://www.automatedhome.co.uk/article.php3?story_id=1110
**
http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/





Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.