[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Serial Protocol Capture...
- To: <ukha_d@xxxxxxx>
- Subject: RE: Serial Protocol Capture...
- From: "Des Gibbons" <des@xxxxxxx>
- Date: Sun, 4 May 2003 11:32:54 +0100
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
>
> Thanks Dave, that looks like it will do the trick.
>
> If I had a spare COM port, I would be able to use Dan's monitor, but I
> don't, so it' s "roll your own" time.
I think Dan's software would be used on a spare PC with 2 comports to do
what you want to. Sort of like a sniffer on the line inbetween your target
hardware and the other PC with the target software.
Havn't used it so that is only an assumption, Dan?
Cheers, Des.
>
> ----- Original Message -----
> From: "Dave McLaughlin" <dave@xxxxxxx>
> Subject: RE: [ukha_d] Serial Protocol Capture...
>
>
> > Hi Ian,
> >
> > Not 100% sure if this will do what you want as it requires some
software
> to
> > be written, but I use their LPT stuff and it works great.
> >
> > http://www.entechtaiwan.com/commspy.htm
> >
> > Regards
> > Dave...
>
>
>
>
> ** UKHA2003 BE THERE! Details here:
> http://www.automatedhome.co.uk/article.php3?story_id=1110
**
> http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe: ukha_d-subscribe@xxxxxxx
> Unsubscribe: ukha_d-unsubscribe@xxxxxxx
> List owner: ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
Home |
Main Index |
Thread Index
|