Re: Re: More on PBX's

["Dan" <dtoma@xxxxxxx>]

Hi Andy,

What kind of hardware do you use?

I can have 1(partially), 2 (only from DECT), 3 (without mobile) just by
using an Actiontec InternetPhoneWizard and a DECT phone with answering
machine (an old Philips Onis Memo2 ).
I can dial SIP numbers from the DECT phone and more, have mixed Call
waiting
(receive PSTN calls when I am in an IP call and reverse).
The only drawback is that the PC is used for all of this.... Actiontec's
device is an USB one.

I want more, to be able to call PSTN numbers from a SIP phone and call
other
SIP phones from a PSTN line (another one, not mine)...
It seems that the Actiontec's FXO interface is not fully FXO.. it is just
switched to the FXS interface when a PSTN call is received or initiated.

Best regards,
Dan

----- Original Message -----
From: "UKHA" <ukha@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Sunday, May 04, 2003 1:12 PM
Subject: Re: [ukha_d] Re: More on PBX's


>
> Hi Dan,
>
> sorry for the delay in replying.
>
> What you want to do is actually what I'm moving towards. Here's are
some
'primary' objectives at the moment.
>
> 1. Someone calls me via SIP I can answer on either a sip phone, my
dect
phones or my mobile
> 2. I can call someone from my mobile/DECT => SIP
> 3. Voicemail
> 4. I can collect my voicemail from SIP/DECT/Mobile.
>
> I don't know if you can use your voice modem. I am trying to find out
for
you. Aside from the
> voice modem issue, you can do what you want with Asterisk... in fact
there
was a recent message
> on the mailing list that allowed people to dial 0800 numbers her in
Holland from anywhere in the world
>
> HTH
>
> Andy
>
>
> *********** REPLY SEPARATOR  ***********
>
> On 04/05/2003 at 12:09 Dan wrote:
>
> >Andy... HEEEEEEEEEEEEEEEEEEEEEELP!!!..
> >:-)
> >Dan
> >
> >----- Original Message -----
> >From: "patricklidstone" <patrick@xxxxxxx>
> >To: <ukha_d@xxxxxxx>
> >Sent: Sunday, May 04, 2003 12:03 PM
> >Subject: [ukha_d] Re: More on PBX's
> >
> >
> >>
> >> > From the web page it is not very clear for me if it can
implement a
> >> gateway
> >> > (H.323 or SIP) using a standard voice modem.
> >>
> >> I don't think it does this out of the box, but it should be
doable.
> >>
> >> > This is all I need.... one FXO interface (the voice
modem) and one
> >> ethernet
> >> > interface.
> >> > I want to be able to call FWD numbers by calling my home
phone
> >> number from a
> >> > regular phone and then (after some kind of
authentication) to dial
> >> a FWD
> >> > number.
> >> > Next I want to have a local SIP user agent registered
with FWD and
> >> when I
> >> > call it from the Internet, to be able to dial to a
regular phone
> >> (after some
> >> > kind of authentication).
> >> >
> >> > Do you think it is possible with Asterisk?
> >>
> >> The short answer is: I don't know :-) I think Andy's set up
is close-
> >> ish to what you want to do... perhaps he can advise?
> >>
> >> Patrick
> >>
> >>
> >>
> >> ** UKHA2003 BE THERE! Details here:
> >http://www.automatedhome.co.uk/article.php3?story_id=1110
**
> >> http://www.automatedhome.co.uk
> >> Post message: ukha_d@xxxxxxx
> >> Subscribe:  ukha_d-subscribe@xxxxxxx
> >> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> >> List owner:  ukha_d-owner@xxxxxxx
> >>
> >> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >>
> >>
> >>
> >
> >
> >
> >
> >** UKHA2003 BE THERE! Details here:
> >http://www.automatedhome.co.uk/article.php3?story_id=1110
**
> >http://www.automatedhome.co.uk
> >Post message: ukha_d@xxxxxxx
> >Subscribe:  ukha_d-subscribe@xxxxxxx
> >Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> >List owner:  ukha_d-owner@xxxxxxx
> >
> >Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
> ** UKHA2003 BE THERE! Details here:
http://www.automatedhome.co.uk/article.php3?story_id=1110
**
> http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>