The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: RE: Plasma panels - what to choose?


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Voice Over IP



Dan,

not much of an issue if they are being used as internal intercoms...
and with the addition of a gateway all calls could be routed to them...

Andy


On 29/04/2003 at 20:52 Dan wrote:

>Hi Andy,
>
>One single problem with this phone: like many other hardware phones,
>including Cisco 79x0 series it does not have G.723 codec.
>The majority of SIP soft phones does not have G.729 as a low bandwidth
>codec
>and G.711 is not allways suitable for low QoS links..
>I have done some teste with Cisco ATA186 (G.711, G.723 and G.729) and
in
>some specific situations the best results I get with G.723, on some
cable
>connections.
>
>Dan




Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.