Re: Clipsal C-Bus review now on-line!

["Frank Mc Alinden" <armagh@xxxxxxx>]

I havnt done any C_Bus courses so im sure some things are not quite
correct......The logic programming to me seems limited a bit at the
moment...
Some more stuff on my site if your interested (much the same)

http://www.users.bigpond.com/armagh/page38.html

Good Luck with the course and looking forward to some tips ;-))

Frank
----- Original Message -----
From: <yahoo@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Friday, March 07, 2003 9:02 PM
Subject: Re: [ukha_d] Clipsal C-Bus review now on-line!


> Yes that makes sense. I'm off on the Clipsal C-bus training next week,
so
it'll
> be interesting re-reading your review and seeing if it matches my
experience.
>
> JB
>
> Quoting Frank Mc Alinden <armagh@xxxxxxx>:
>
> > Hi Jon
> >             When i originally automated my lighting using relays
i ran a
> > "Twin Active "cable from the electrical control box to
all lights..and
> > series the relays with the existing switched live from existing
> > switch....All existing light switches are left on and Genesis
controlled
on
> > / off all lites....When i installed the C_Bus Dimmer only one leg
of the
> > "Twin Active.. the white wire  " (goes directly to the
light) gets
connected
> > to the C_Bus dimmer as the 8 Channel dimmer has a live connected
to
it....So
> > my existing switches do nothing now..and the red wire i put
connectors
on
> > them ....
> >     I hope this makes sense
> >
>
>
> http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>


http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/