[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Clipsal C-Bus review now on-line!
- To: <ukha_d@xxxxxxx>
- Subject: RE: Clipsal C-Bus review now on-line!
- From: "Dean Barrett" <dean@xxxxxxx>
- Date: Fri, 7 Mar 2003 10:05:04 -0000
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Do you mean that you can see lives but no neutrals, or that the outgoing
circuits go via seperate MCB's
All neutrals are taken to a common location, usually on a row of 'clip-on'
terminals connected together, back to the single neutral incomer.
The Dimmer modules are fed via a common incoming feed - 6/10amp etc. - each
outgoing circuits live should then be routed through a 1 or 2amp MCB to
provide suitable protection to those circuits.
Dean.
-----Original Message-----
From: yahoo@xxxxxxx [mailto:yahoo@xxxxxxx]
Sent: 07 March 2003 09:37
To: ukha_d@xxxxxxx
Subject: Re: [ukha_d] Clipsal C-Bus review now on-line!
Frank,
One question, the second to last picture that is on the review shows the
wiring
of the C-bus modules. It appears that the cabling from the lights etc
doesn't
go directly into the c-bus modules. Is this the case? If it is what are
they
connected through?
JB
coming into some
> Frank's review and pictures of his C-Bus setup is now on-line...
>
> http://www.automatedhome.co.uk/article.php3?story_id=1173
>
> M.
Home |
Main Index |
Thread Index
|