Re: Clipsal C-Bus review now on-line!

["Frank Mc Alinden" <armagh@xxxxxxx>]

Hi Jon
When i originally automated my lighting using relays i ran a
"Twin Active "cable from the electrical control box to all
lights..and
series the relays with the existing switched live from existing
switch....All existing light switches are left on and Genesis controlled on
/ off all lites....When i installed the C_Bus Dimmer only one leg of the
"Twin Active.. the white wire  " (goes directly to the light)
gets connected
to the C_Bus dimmer as the 8 Channel dimmer has a live connected to
it....So
my existing switches do nothing now..and the red wire i put connectors on
them ....
I hope this makes sense

Frank

----- Original Message -----
From: <yahoo@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Friday, March 07, 2003 8:36 PM
Subject: Re: [ukha_d] Clipsal C-Bus review now on-line!


> Frank,
>
> One question, the second to last picture that is on the review shows
the
wiring
> of the C-bus modules. It appears that the cabling from the lights etc
doesn't
> go directly into the c-bus modules. Is this the case? If it is what
are
they
> connected through?
>
> JB
>
> coming into some
>
> > Frank's review and pictures of his C-Bus setup is now on-line...
> >
> > http://www.automatedhome.co.uk/article.php3?story_id=1173
> >
> > M.
>
> http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>


http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/