The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Loooooooooong kek press on a Pronto


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Loooooooooong kek press on a Pronto
  • From: <ha@xxxxxxx>
  • Date: Tue, 15 Jul 2003 16:45:49 +0100
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Steve,

I've had the same problem with a customers old sony telly. The AV inputs
are
addressed by scrolling through the same IR commands.

The only way I've thought of so far would be to build a IR controller
scart-scart unit which switched the 'active' pin 8 on when an IR command is
received (would have to be discrete on and off commands). Then with an IR
controlled scart switcher, you could have Pronto macros that would activate
the scart input, and switch to the right input on the switcher. When you go
back to the telly signal, de-activate the scart input.

Someday I'll get off my ass and try it.

Richard




-----Original Message-----
From: Crick, Steve (UK) [mailto:steve.crick@xxxxxxx]
Sent: 15 July 2003 16:06
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] Loooooooooong kek press on a Pronto



Ah-ha. That's the puppy.

This works for the TV. I tried something like this to get my Akai VCR to
record a few years ago (it also needs a held press) when my Pronto was
new, and before I had TiVo; but I could never get that to work.

The TV is now turning on and off at least (Panasonic TV have no discrete
codes for AV selection, so now I have to think my way around that one, I
was spoilt with the Sony!).

Many thanks for your help everybody.

Steve

-----Original Message-----
From: Nikola Kasic [mailto:nikola@xxxxxxx]
Sent: Tuesday, July 15, 2003 2:42 PM
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] Loooooooooong kek press on a Pronto


*** WARNING ***

This mail has originated outside your organization,
either from an external partner or the Global Internet.
Keep this in mind if you answer this message.

Try this:
http://www.remotecentral.com/pronto/pfaq-b8.htm#b8-03
Nik

********************************************************************
This email and any attachments are confidential to the intended
recipient and may also be privileged. If you are not the intended
recipient please delete it from your system and notify the sender.
You should not copy it or use it for any purpose nor disclose or
distribute its contents to any other person.
********************************************************************


Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.