RE: Loooooooooong kek press on a Pronto

["Nikola Kasic" <nikola@xxxxxxx>]

Try this:
http://www.remotecentral.com/pronto/pfaq-b8.htm#b8-03
Nik

-----Original Message-----
From: Bricknell, Tony [mailto:tony.bricknell@xxxxxxx]
Sent: 15 July 2003 14:32
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] Loooooooooong kek press on a Pronto


Perhaps not the easiest of solutions but could you, having learned the
full
("start" + "held") code into Pronto, extract the
"start" and "held"
portions
(believe there is s/w on www.remotecentral.com that will do/help do
this),
assigning them to different buttons.

Then:

Macro = "Start" + "Held" + "Held" +
"Held" + "Held"...?

-----Original Message-----
From: Dean Smith [mailto:ukha@xxxxxxx]
Sent: 15 July, 2003 13:25
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] Loooooooooong kek press on a Pronto


Having said that I now realise you want to simulate a long press in a
macro - and I have no idea how to do taht :(

Dean

-----Original Message-----
From: Dean Smith [mailto:ukha@xxxxxxx]
Sent: 15 July 2003 14:17
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] Loooooooooong kek press on a Pronto


A pronto IR code definition in has 2 bits - the code to be sent for a
single
key press and the code to be sent for a "held" button. This
second code
will
be repeated for as long as the button is held

Try relearning them or have a look round at remote central for suitable
codes.

Dean