The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Re: Bathroom LCD


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Loooooooooong kek press on a Pronto



Perhaps not the easiest of solutions but could you, having learned the full
("start" + "held") code into Pronto, extract the
"start" and "held" portions
(believe there is s/w on www.remotecentral.com that will do/help do this),
assigning them to different buttons.

Then:

Macro = "Start" + "Held" + "Held" +
"Held" + "Held"...?

-----Original Message-----
From: Dean Smith [mailto:ukha@xxxxxxx]
Sent: 15 July, 2003 13:25
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] Loooooooooong kek press on a Pronto


Having said that I now realise you want to simulate a long press in a
macro - and I have no idea how to do taht :(

Dean

-----Original Message-----
From: Dean Smith [mailto:ukha@xxxxxxx]
Sent: 15 July 2003 14:17
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] Loooooooooong kek press on a Pronto


A pronto IR code definition in has 2 bits - the code to be sent for a
single
key press and the code to be sent for a "held" button. This
second code will
be repeated for as long as the button is held

Try relearning them or have a look round at remote central for suitable
codes.

Dean


Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.