[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: X10 MS13 - How can I modify it to only send OFF signal
- To: ukha_d@xxxxxxx
- Subject: Re: X10 MS13 - How can I modify it to only send OFF
signal
- From: "K. C. Li" <li@xxxxxxx>
- Date: Thu, 19 Jun 2003 11:56:54 +0100 (BST)
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
On Thu, 19 Jun 2003, egelbeertje wrote:
> Now I would like to add an MS13 to switch off if no movement in the
> rooms but I don't want it to send ON signals (since they also tend to
It would be a difficult thing to do. Without a definitive start, the
module would have no way of knowing when to send the OFF command. It can
be achieved with a more intelligent controllers such as Homeseer or Home
Vision.
> Also I could do without the dusk sensor - switching the light on has
> to be a manual thing for the kids, it only has to go off if they're
> not around.
The Dusk to Dawn sensor function is configurable on recent versions of the
MS13E but not on older versions. For older versions, a small piece of
black insulation tape over the light sensor would achieve the same effect.
The light sensor is easily identified as a small cylindrical unit the size
of a pea that has a clear window with a zigzag marking within it.
Regards,
Kwong Li
li@xxxxxxx
Laser Business Systems Ltd.
http://www.laser.com
Home |
Main Index |
Thread Index
|