The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: PABX and ADSL phone lines


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: PABX and ADSL phone lines
  • From: "Steve Morgan" <smorgo@xxxxxxx>
  • Date: Wed, 17 Dec 2003 11:48:27 -0000
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Pete,

What's wrong with your Omnicom? There's a number of common faults that are
easy enough to fix and I've still never found a reasonable alternative.

I also have ADSL and an Omnicom FS2828 PABX and, as you say, it works just
fine.

Steve

> -----Original Message-----
> From: Pete Shew [mailto:pete@xxxxxxx]
> Sent: 17 December 2003 10:02
> To: ukha_d@xxxxxxx
> Subject: Re: [ukha_d] PABX and ADSL phone lines
>
> I split off the ADSL signal and feed the filtered phone line
> to my PBX - no problem at all.
>
> You can't sensibly route the ADSL signal through the exchange
> as you would lose the "always on" aspect and tie up the
phone
> line when you were using it - even if it worked,
>
> On a slightly different topic, my exchange - Omnicom FS2828 -
> is a bit creaky and sometimes loses it's marbles, so I'm
> thinking of a self build.
> Has anyone here been down that road?
>
> Pete


UKHA 2004: 15th and 16th May 2004

http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx


Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.