The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Is there a HA forum ?


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Automatic watering


  • To: ukha_d@xxxxxxx
  • Subject: Re: Automatic watering
  • From: "Rob Lamb" <rjl@xxxxxxx>
  • Date: Wed, 03 Dec 2003 15:55:41 -0000
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Thanks Tim - I was impressed the first time I saw it. I was really
trying to use some bits that I had as this seemed the easiest thing
to do (at the time!).

I'll see if a short pulse does the trick.

Rob

--- In ukha_d@xxxxxxx, "Hawes,Timothy Edward (GEG)"
<haweste@a...> wrote:
> Rob,
>
> Take a look at Ian's setup at:
> http://www.mollyology.com/MyHouseIrrigation.htm
>
> Very impressive, and controlled from HV (and xAP ?) too.
>
> HTH,
>
> Tim.
>
> > -----Original Message-----
> > From: Rob Lamb Sent: 03 December 2003 11:49
> >
> > I need a little help with a new project. Up until now I've used
a
> > standalone Gardena water computer to control my irrigation
system
> > but as this now seems to have failed and I now also have
Homevision
> > I thought I try to control the valve part of the water computer.
> > Taking the water computer apart there are just a pair of wires
that
> > lead to what looks like an electromagnet on the valve. Connect
9V DC
> > to these leads (that's the same as the battery the computer
used)
> > and hey presto water flows through the valve. But here's the
> > problem. Disconnect the power and - the water still flows! Any
ideas
> > on what I'm doing wrong or what to do next?
> >
> > Regards,
> >
> > Rob
>
> +



Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.