The UK Home Automation Archive

Archive Home

Group Home

Search Archive
Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Controlling servos

To: <ukha_d@xxxxxxx>
Subject: RE: Controlling servos
From: "Andy Laurence" <andy@xxxxxxx>
Date: Wed, 3 Dec 2003 12:36:32 -0000
Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
Reply-to: ukha_d@xxxxxxx

From: Paul Gale [mailto:groups@xxxxxxx]
> Does anyone have a simple circuit to be able to control a servo (only
need 2 positions). The servo is a Ripmax mini
> servo SD200. The pan and tilt circuitry controls 2 other servos and
uses a pic controller but I guess that would be too
> difficult to modify.

There's a load of circuits out there based on PIC chips that take a simple
serial input and move upto 8 (generally) servos to the defined position....

http://www.digitalnemesis.com/ash/projects/picservo/default.htm
http://www.rentron.com/SerialServo.htm
http://www.havingasoftware.nl/robots/servo/servo.htm
http://www.sproggy.freeserve.co.uk/servo.html

The kits can also be bought....

http://www.quasarelectronics.com/3102.htm
http://www.robotstoreuk.com/MICRO-CONTROLLERS/Robotica-SERVO-cont/Robotica%20-%20Serv0-CONTROLLER-1.htm
http://www.robotica.co.uk/robotica/ramc/products/servo_control/servo_control_technical.htm

Prices clearly vary.

HTH,
Andy
--
http://ha.andylaurence.co.uk
http://projects.andylaurence.co.uk

Prev by Date: RE: [OT]Hi8 to MPEG advice req
Next by Date: Dual recording now available on Sky+
Previous by thread: Controlling servos
Next by thread: inverters and generators
Index(es):
- Date
- Thread

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.